Fusion 360 for Engineers | Part 1

Autodesk Fusion 360 addresses all aspects of the engineering process in one platform. In this course, we will work with imported FSAE chassis models, design and simulate mechanical suspension components, and validate motion in an assembly.

Foundational icon

Lesson 1: Course overview

Course overview of a series of easy to follow video tutorials and exercises that walk you through the essentials of using Fusion 360 for Engineering.

Circle grey Intermediate

1 min 5 seconds

Foundational icon

Lesson 2: File Import

This lesson shows how to create a project folder, upload a file, and enable Capture Design History.

Circle grey Intermediate

1 min 23 seconds

Foundational icon

Lesson 3: Hide Bodies and Make Components | part 1

This lesson shows how to create new empty components, create new components from bodies, and drag and drop components.

Circle grey Intermediate

8 mins 1 second

Foundational icon

Lesson 4: Hide Bodies and Make Components | part 2

This lesson shows how to create a timeline group.

Circle grey Intermediate

7 mins 7 seconds

Foundational icon

Lesson 5: Bearing Insert | part 1

This lesson shows how to insert a McMaster-Carr part, use Move/Copy, and use Align.

Circle grey Intermediate

8 mins 23 seconds

Foundational icon

Lesson 6: Bearing Insert | part 2

This lesson shows how to add a joint.

Circle grey Intermediate

6 mins 1 second

Foundational icon

Lesson 7: DXF Caliper Reference

This lesson shows how to insert a DXF file and Move/Copy on a sketch.

Circle grey Intermediate

9 mins 5 seconds

Foundational icon

Lesson 8: Upright Creation | part 1

This lesson shows how to construct a mid-plane and create an intersect curve.

Circle grey Intermediate

5 mins 11 seconds

Foundational icon

Lesson 9: Upright Creation | part 2

This lesson shows how to create a sketch point.

Circle grey Expert

7 mins 17 seconds

Foundational icon

Lesson 10: Upright Creation | part 3

This lesson shows how to create and dimension sketch entities.

Circle grey Intermediate

3 mins 38 seconds

Foundational icon

Lesson 11: Upright Creation | part 4

This lesson shows how to create a symmetric extrude and a chamfer. Additionally, we cover how to use Selection Filter, Move/Copy, and Press/Pull.

Circle grey Intermediate

5 mins 59 seconds

Get it now

fusion 360

Stop struggling with broken processes and get back to what you do best. A complete product development solution is waiting for you.


Are you a student or educator?
Get Fusion 360 free


Request time with a representative or call us at: 1-833-843-3437

Request a demo